load-bearing wall foundation
A foundation in which the slurry wall or a vertical slab provides major load-bearing structural support.
In smaller buildings, and occasionally in large structures, the perimeter slurry walls or other vertical slab systems assist in the load-bearing structural support. In most tall buildings, the slurry walls at the edge of the foundation merely hold out surrounding earth and water, and play little role in structural support; therefore these are not counted as part of the foundation system. When this foundation type is applicable to large buildings, it is usually found in combination with some other foundation type.
The wall or vertical slab participates in carrying the structure above. Holding surrounding soil and water back alone does not establish this foundation type.
A load-bearing wall can operate together with another foundation system. Its structural contribution remains distinct from a perimeter retaining wall with little building-load support.
Related definitions
-
caisson foundation
A foundation consisting of reinforced concrete piers which are poured into drilled holes in the ground. -
floating
An object freely supported by water or another liquid or semi-liquid substance, without a fixed foundation. -
mat foundation
A foundation supporting essentially an entire building on a large continuous footing, sometimes combined with piles or caissons. -
mooring
A support arrangement tying a water-supported floating structure to a fixed point, temporarily or permanently. -
no foundation
An object designed to rest directly on the ground through its own cohesive construction, without a built foundation. -
pile foundation
A foundation consisting of vertical supports which are hammered into the ground. -
spread foundation
A foundation distributing structural loads through one or more broad horizontal footings, mats, or pads.